Print this page

Tips For Installing Window Blinds on Windows

Written by Posted On Wednesday, 28 November 2018 07:01

Installing a is a simple task to do if you have the necessary tools and knowledge. Calling a professional custom blinds installer is even easier. But if you do not waste time and save money, in this article we explain how to install a blind. Put on your work clothes, let's start with the installation.

Measure your window

Take measurements for installation outside the frame: Take measurements along the outer edges of the window frame. Calculate the exact distance between the top of the frame and the bottom of the frame (or window sill, if applicable).

Take measurements for an interior installation to the frame: This time, place the meter inside the frame, at the joint between the glass and the frame. Also measure the width of the window at the top, middle and bottom of the frame. If these measurements are different, take the smaller one for reference.

Buy your blinds according to the measurements you have just made. There are many types of blinds: vinyl, aluminum, wood or even photovoltaic. Make your choice according to your personal preferences.

If you plan to install aluminum blinds in a daycare center or in your children's room, make sure they are covered with a certified lead-free paint.

Draw small marks in preparation for editing

Unpack your blinds and start by checking that all parts are present. If instructions accompany the package, follow them as you follow the instructions below.

For installation outside the frame: Hold the awning where you want to install it so that the top rail is centered in the window. Pull a small pencil line on the frame just below the top rail. Also, make a small mark of about 0.5 cm at each end of this rail.

For installation inside the frame: Place the top rail inside the frame. Make sure it is straight, even if the window is not. Trace small marks at each corner of this rail.

Fix the supports

Open the small shutter of the shade holder and hold it in place. Of course, place each support inside the space delimited by the lines you have drawn previously. You will find that there are two open sides on the support. One of them must face you, while the other must face the center of the opening. Pay attention that the small shutter is facing the inside of the room.

Mark the location of your screws

Using your pencil, mark the places where you will need to drill the holes that will host the screws (you will need to drill two). For a more robust support, opt for diagonal holes. So remove the supports, before checking that the two locations are at the same level.

For installation outside the frame: The supports must be placed on the outside of the frame, on each side of the window.

For installation inside the frame: The supports must be placed near the top corners of the window, inside the frame.

Drill the holes for the screws

Each support is accompanied by two screws. If your window frame is made of wood, use a wick with a diameter slightly smaller than that of the screws. In this way, the hole will be slightly narrower than the screw that will hold the bracket. Then replace the brackets, before screwing them firmly.

If you drill holes in plasterboard, plaster, concrete, tile, stone or brick, use appropriate bits, screws, and dowels. Also, follow the instructions that accompany them.

Install the top rail and its valance

These clips are used to attach the top rail to the cover that will hide it. The valance (or box curtains) is indeed what covers the upper rail to give it a look a little more pleasant. The clips on this cover must be installed at the front of the top rail before it is attached to the brackets

It is possible that your blinds are made of a kind of slats scale. If this is the case, install each clip near the top of each scale and not directly at the top. Otherwise, the clips for the valance may become entangled in the cords of the blinds.

Arrange the top rail in its brackets

Once you have finished screwing the brackets, make sure the flaps of the brackets are fully open before inserting the top rail. Then close the small shutters to fix this rail. When you close them, you should hear a light enough slam.

Secure the valance

Arrange the cover in the position you want to give it, along with the top rail. In doing so, place it on the clips intended to hold it. When the cover is properly positioned, gently press down to secure it.

Attach the opening rod of the blinds

If your new awnings have an opening wand and it's not already in place, it's time to install it. Release the hook from its plastic sleeve, insert the end of the rod into this hook and replace the protective sleeve.

Our Advice

Do not forget to read the instructions that accompany your new stores.

Ask someone to help you maintain the blinds. Also, have someone drill the holes for the screws if you have never used a drill.

Necessary elements

•   Blinds (accompanied by supports, an upper rail, a valance, and its fixings)

•   One meter

•   A carpenter's level

•   A pencil

•   A drill

•   Screws

 

Rate this item
(0 votes)
Lily

Latest from Lily

Joomla! Debug Console

Session

Profile Information

Memory Usage

Database Queries